Blog

Don't try to rush the project! Finding the right help is better than anything else!

01. Labor efficiency is limited, and quality is difficult to guarantee.

The anxiety of rushing to meet deadlines is something every construction worker understands. It's not that workers are unwilling to do the work, but some tasks are truly "bottlenecked" by manpower alone, and working overtime and nights is commonplace: the walls plastered by novices are uneven and need to be redone; although experienced workers are fast, the errors will also increase under high-intensity work; what's even more troublesome is the mortar, when it is poured, the mortar piles up into small mounds when it falls, which means that almost half a ton of material is wasted every day, and the cost is too much to calculate in detail.

02. Derutu Mechanical Assistance for Manual Labor

Just as Foreman Li was preparing to apply for additional manpower, a building materials supplier he had previously cooperated with sent him a message: "Try Derutu's plastering equipment? It's not about machines completely replacing people, but about helping people carry heavy work and maintaining precision." With a try-it-out mentality, he contacted us.

03. Dual-machine collaboration unlocks new solutions for cost reduction and efficiency improvement.

After half a day of trial work, Foreman Li immediately saw the difference: previously, five people were working non-stop, but now, with two workers cooperating with one spraying machine and one plastering machine, the progress has doubled. More importantly, the wall finish is visibly more precise, with almost no visible plaster falling off the wall—this is the core advantage of machinery assisting manual labor: using the stability of equipment to compensate for the shortcomings of manual labor, and using the efficiency of equipment to amplify the value of manual labor, unlocking new solutions for cost reduction and efficiency improvement.

PC18 Mortar Spraying Machine: Provides a strong base coat, is efficient, and even junior workers can learn to use it instantly.

The PC-18 mortar spraying machine features an enlarged pitch design, accommodating mortar aggregates up to 8mm in diameter. With its high flow rate and high lift, it significantly simplifies the construction process and improves work efficiency. Suitable for interior walls, exterior walls, self-leveling surfaces, and other applications, it uses air-assisted spraying to atomize the mortar into numerous points, ultimately creating a continuous, seamless surface, thus eliminating problems such as wall hollowing at the source.

DM Intelligent Plastering Machine: Accurate leveling, quick to learn, and precision that doesn't require constant monitoring.

If PC18 is a "master of the base," then DM is a "leveling expert." The "straightening" step, which used to be the most time-consuming for experienced technicians, is completely eliminated by DM, and its judgment is even more accurate than that of the experienced technicians.

Addressing the pain points of unstable quality and low efficiency of manual plastering, it eliminates the need for traditional dotting and screeding processes, making plastering 2-3 times more efficient than manual plastering. The verticality error of the wall can be controlled within 2 millimeters by a microcomputer, and the adhesion and bonding strength are 2.5 times that of manual plastering. The overall construction cost can save 3-5 yuan per square meter compared to manual plastering!

04. Mechanical assistance gives construction workers more confidence.

Now, the plastering process for Foreman Li's affordable housing project has been completed 10 days ahead of schedule. During the inspection, the client's representative measured the walls again and again with a ruler, and said with a smile, "The quality of these walls is even more standard than the model room."

The construction site of the future will not be solely "the domain of machines," but rather "a harmonious partnership between humans and machinery." Just like Derutu's philosophy: "Let workers exert less effort and earn more, let projects save costs and maintain quality." Let equipment become the "comrades-in-arms" of construction workers, so that every construction worker can earn a living through skill, not just brute force!

If you also have questions related to plastering construction, feel free to leave a comment below!